Brite Max Enhanced Conspicuity Safety Products

C ustom P roducts C orporation · 1-800-367-1492 phone · 1-800-206-3444 fax · www.cpcsigns.com ©2020 Custom Products Corporation All Rights Reserved. BRITEMAX ENHANCED CONSPICUITY FOR SIGNS - MUTCD COMPLIANT 2 Brite Max Post Reflectors are 30", 36", 48", 60", 72", or 84" Long. Combinations of them may be used so that they meet the MUTCD requirement of covering the full length of the sign support from the sign to within 2 feet above the edge of the roadway. They shall match the background color of the sign, except that the color of the strip for the YIELD and DO NOT ENTER signs shall be red. Passive highway-rail grade crossings require Brite-Max Post Reflectors on the front and back of the sign supports. Affix Brite-Max Single View Post Reflectors to U-Channel, Square, or Wood posts to enhance safety by making signs more visible. Brite-Max Single-View Post Reflectors PRODUCT ID: BA080(X)(XX)(XXXX)BM Single-View Reflectors are flat without angled sides. All Brite-Max Post Reflectors may be stacked for more effectiveness. Utilize a Brite-Max Post Reflector on both sides of a post in the same or different colors to further delineate the roadway. Materials: Reflective Sheeting mounted on .080” Aluminum Reflective Sheeting (X): (H) High Intensity Prismatic (D) VIP Diamond Grade | (3) DG3 Diamond Grade Cube Colors (XX): (YE) Yellow | (FY) Fluorescent Yellow (WH) White | (RE) Red | (OR) Orange/Fluorescent Orange (FG) Fluorescent Yellow-Green Sizes (XXXX): (0330) 3" x 30" | (0336) 3" x 36" | (0348) 3" x 48" (0360) 3" x 60" | (0372) 3" x 72" | (0384) 3" x 84" Hole Punch: 2 mounting holes on center - 3" in on 3" side. Reflectors over 36" also have 1 hole on center. Compatibility: Fasten to U-Channel, square, wood posts with mounting hardware, or mount to round posts using standard round post to traffic sign brackets. Brackets and hardware, sold separately. NOTE: Standard available sizes, colors and sheeting combinations shown, custom combinations available. MUTCD Guidance Enhanced Conspicuity for Standard Signs (Section 2A.15) COLOR DEFINITIONS: WHITE: Use under white signs and plaques; such as Speed Limit, Intersection and Lane Control, Passing and Guidance, and Highway-Rail Grade signs. YELLOW: Use under yellow signs and plaques; such as Warning, Passing, Vehicular, Non-Vehicular, Neighborhood, Child Safety, Highway-Rail Grade, Roadway Conditions and Advance Traffic signs. RED: Use under red signs and plaques; such as Stop, Yield, Do Not Enter, All Way or Wrong Way signs. FLUORESCENT YELLOW-GREEN: Use under signs in school zones. ORANGE/FLUORESCENT ORANGE: Use under signs in construction work zones. (H/D/3)(RE) (H/D/3)(WH) (H/D/3)(YE) (D/3)(FY) (H)(OR) (D/3)(FG) (D/3)(OR) 30" 48" 36" 60" 84" 72"