JD Cube Barrier Markers [100/BOX]
This Marker Sold per Box of 100.
Use the JD Cube Barrier Markers around sharp curves or obstructions.
-
PRODUCT ID: RDBMJD(X)(XX)
-
Reflective Sides (X): (1) Single-Face | (2) Double-Faced
-
Reflective Colors: (YE) Yellow | (WH) White
-
Size: 3" high and 5 1/2" wide.
-
The JD Cube is bright!
-
Delineates the barrier far in advance to approaching drivers.
-
The JD Cube is the largest acrylic cube corner delineator in the industry.
-
More than two times brighter than requirements for prismatic reflectors as shown by state photometric tests.
-
Marker Materials: ABS and Acrylic
-
MUTCD Guidance: Meets the minimum MUTCD requirements for reflectivity. Exceeds all state and federal brightness standards.
About Delineators
Delineators are beneficial at locations such as at lane-reduction transitions and curves and provide effective guidance at night and during adverse weather conditions. Refer to the MUTCD for more information.
-
Retroreflective elements for delineators shall have a minimum dimension of 3 inches.
-
Delineators are considered guidance devices rather than warning devices.
-
Delineators may be used on long continuous sections of highway or through short stretches where there are changes in horizontal alignment.
Color Definitions
-
WHITE: Lane markings or to mark the right pavement edge.
-
YELLOW: Separate traffic moving in opposite directions, or mark the left pavement edge on one-way roadways.
-
RED: Used to warn motorists of "Do Not Enter" or "Wrong Way". Also, delineators shall be red when used on a truck escape ramp.
-
BLUE: Used to mark the location of fire hydrants on the shoulder or at the curb.
-
GREEN: Used for snowplow markings.
-
ORANGE: Used in construction work zone areas.
