Premium Type A and C Solar Switch Warning Light

Product ID: RSPBL3LS(X)SM

Price:

Lens Colors

« Previous | Next »

Description
About Barricade Warning Lights
Mounting Brackets Support Guidance
Literature

Call Customer Service at 1-800-367-1492 to order the products on this page.

Premium Type A and C Solar Switch Warning Light

The Premium Type A and C Solar Switch Warning Light is a solar powered light that can be used in flashing or steady modes.

PRODUCT ID: RSPBL3LS(XX)SM
Colors (XX): (YY) Yellow/Yellow | (RY) Red/Yellow
Nighttime Use
Options: Flasher or steady burn
The light comes fully assembled and ready to use.
The on/off switch should ALWAYS be in the OFF position when light is not in USE.
The ON/OFF switch is in the OFF position when the light is shipped.
It is best to install the lights during daylight hours and turn them ON.
To ensure a full charge, place product in sun for 3 hours prior to first use.
A fully charged unit will operate the light for seven days without sunlight.
Operate 336+ Hours (Flash Mode); 168+ Hours (Steady Burn Mode)
Once turned ON, light will automatically operate from dusk until dawn.
To mount the unit, insert the security bolt (included) through a barricade or other device and into the mounted nut plate. Secure the unit in place with the included socket tool.
Box Contents: DF002 Type A/C Solar Light | 3 3/4” x 1/2” Security Bolt | Socket Security Tool | Push Pin On/Off Key
Key Wire/Push Pin - Insert into pin hole in base to turn unit on/off & toggle between flash &/or steady burn.

About Barricade Warning Lights

According to the MUTCD, a series of sequential flashing warning lights may be placed on channelizing devices to increase driver detection. Warning lights shall have a minimum mounting height of 30 inches to the bottom of the lens. Refer to the MUTCD for more information.

Type A (Low-Intensity Flashing) Warning Lights may be mounted on channelizing devices and are used to warn road users during nighttime hours that they are approaching or proceeding in a potentially hazardous area.
Type B (High-Intensity Flashing) Warning Lights are used to warn road users during both daylight and nighttime hours that they are approaching a potentially hazardous area. Type B warning lights are designed to operate 24 hours per day and may be mounted on advance warning signs or on independent supports.
Type C (Steady-Burn) Warning Lights may be used during nighttime hours to delineate the edge of the traveled way. When used to delineate a curve, Type C warning lights should only be used on devices on the outside of the curve, and not on the inside of the curve.

Mounting Brackets Support Guidance

Mounting Brackets allow proper alignment of warning light to meet I.T.E. and MUTCD requirements and have positive stops to eliminate rotation!

The MUTCD states when flashing warning lights are used in conjunction with signs, they shall not block the sign face.
According to MUTCD guidelines, warning lights shall be mounted on signs or channelizing devices in a manner that, if hit by an errant vehicle, they will not be likely to penetrate the windshield.
I.T.E. Specifications require the lights to be mounted with base of the light perpendicular to the ground line.

Construction Work Zone Products view pdf

Product Reviews

No Reviews For This Product.

Related Products