Series 344 3M Linear Delineation System 4" Panels {BOX of 50}
Proven technology for increased safety.
3M's linear delineation system is designed for the linear reflectorization of concrete barriers and metal guardrails. LDS panels enhance driver safety where there is a need to call attention to a changed or changing condition such as an abrupt roadway narrowing or curvature, or to provide guidance through a work zone. Common applications include: Curved Roadways, Tunnel Approach, Entrance and Exit Ramps, and Bridges.
- LDS Panels Sold per Box of 50.
- PRODUCT ID: RDLDS(X)344
- Colors (X): (W) White | (FY) Fluorescent Yellow | (R) Red | (FO) Fluorescent Orange
- Reflective Sheeting: Diamond Grade
- Panel Size: 4" x 34"
- Sheeting is laminated onto a thin gauge of aluminum and formed to a unique shape which provides retroreflection across a very wide range of entrance and observation angles.
- Linear Delineation System Panels are an economical and durable solution for the linear reflectorization of concrete barriers and metal guardrails.
- Compatibility: Designed for Concrete Barriers and can also be used on Metal Guardrails.
- Installation on Concrete Barriers: Use 3M Windo-Weld Super Fast Urethane Adhesive (12 tubes per 120 panels needed) -or- use Anchor Bold Method. See Installation Guide for more information.
- Installation on Guardrails: Install 3M Guardrail Brackets with 3M Windo-Weld Super Fast Urethane Adhesive and insert panels into brackets. See Installation Guide for more information.
- Linear Delineation System (LDS) Installation Guide view pdf
About Delineators
Delineators are beneficial at locations such as at lane-reduction transitions and curves and provide effective guidance at night and during adverse weather conditions. Refer to the MUTCD for more information.
-
Retroreflective elements for delineators shall have a minimum dimension of 3 inches.
-
Delineators are considered guidance devices rather than warning devices.
-
Delineators may be used on long continuous sections of highway or through short stretches where there are changes in horizontal alignment.
Color Definitions
-
WHITE: Lane markings or to mark the right pavement edge.
-
YELLOW: Separate traffic moving in opposite directions, or mark the left pavement edge on one-way roadways.
-
RED: Used to warn motorists of "Do Not Enter" or "Wrong Way". Also, delineators shall be red when used on a truck escape ramp.
-
BLUE: Used to mark the location of fire hydrants on the shoulder or at the curb.
-
GREEN: Used for snowplow markings.
-
ORANGE: Used in construction work zone areas.
