Silver 5.5" Post Cap Bracket for 1.75" to 2" Square Posts
The Silver 5.5" Post Cap Bracket for 1.75" to 2" Square Posts is a sign bracket that mounts to the top of a post.
-
PRODUCT ID: RPB134SQ(F/X) for 1.75" Square Post
-
PRODUCT ID: RPB97SQ(F/X) for 2" Square Post
-
For Blade Type: (F) Flat or (X) Extruded Blades
-
Slot Size: 5.5"
-
Compatibility: This bracket is designed to be used on a 1.75" or 2" post.
-
Material: Aluminum
-
Color: Silver
-
Hardware: The brackets comes individually packaged in a plastic bag with the included hardware pre-inserted in bracket to attach bracket to sign and bracket to post. Vandal resistant hardware upgrades are available.
-
MUTCD Guidance: Recommended for street name flat sign blades no more than 6" tall. Not recommended for 9" tall or larger street name signs. Jumbo brackets are available for larger signs.
-
Installation Notes: Brackets must be installed with appropriate hand tools. Brackets should be hand tightened to 3 Foot Pounds of Torque. This is sufficient for the set screw to bite into the aluminum sign and prevent it from coming out of the bracket. Over-tightening causes the bracket to flare and ultimately break as well as embed itself into the aluminum sign. Power tools such as drills and impacts should NOT be used. Power tools cause over tightening, which in turn, causes bracket failure. Returns or exchanges are not available if power tools have been used.
-
NOTE: Available in box quantities by calling customer service at 1-800-367-1492.
