Silver Hardware Sets for Mounting Brackets to 4" OD Posts
Use the Silver Hardware Sets for Mounting Brackets to 4" OD Posts.
-
PRODUCT ID: OZRH04 for Mounting 2 Sign Arm Brackets to 4" Post
-
PRODUCT ID: OZHRH04L3 for Mounting Sign Trim Brackets to 4" Post
-
Color/Finish: Silver
-
Compatibility: Hardware sets are for use with 4" OD round or square posts.
-
Installation Notes: Brackets must be installed with appropriate hand tools. Brackets should be hand tightened to 3 Foot Pounds of Torque. This is sufficient for the set screw to bite into the aluminum sign and prevent it from coming out of the bracket. Over-tightening causes the bracket to flare and ultimately break as well as embed itself into the aluminum sign. Power tools such as drills and impacts should NOT be used. Power tools cause over tightening, which in turn, causes bracket failure. Returns or exchanges are not available if power tools have been used for installation.
-
NOTE: Available in larger quantities by calling customer service at 1-800-367-1492.
