Standard Ground Mounted Tube Delineators [BOX of 10]
Tubular Markers and Tube Delineators Easy Order Checklist view pdf
Tube Delineators are beneficial at locations such as at lane-reduction transitions and curves and provide effective guidance at night and during adverse weather conditions.
- This Tube Delineator Sold per Box of 10. Some Tube Delineators are available for individual purchase, see Related Products.
- PRODUCT ID: RPOFDGNTD2(H)(C)38(R)
- Tube Delineator Heights (H): (36) 36" | (42) 42" | (48) 48"
- Body Colors (C) : (WH) White | (YE) Yellow | (OR) Orange
- 3" x 12" Reflective HIP Sheeting (R):
(WH) White/Single-Sided
(WHD) White/Double-Sided
(YE) Yellow/Single-Sided
(YED) Yellow/Double-Sided
- Specifications: The 2.25" OD (outside diameter) Tube is flattened to a width of 3.125" for use as a delineator. The distance is 15" from the top to accomodate up to a 3" wide reflective strip.
- Highly visible, day or night.
- Remains flexible at extreme temperatures, and returns upright after impact.
- Approved by most state DOT's.
- Installation: 2 part system consisting of a drivable ground anchor and a replaceable flexible tubular post.
About Tubular Markers & Tube Delineators
Delineator: a retroreflective device mounted on the roadway surface or at the side of the roadway in a series to indicate the alignment of the roadway, especially at night or in adverse weather.
Tubular Markers may be effectively used for emphasis of pavement marking patterns including - opposing lane dividers of traffic - dividing traffic when two or more lanes are kept open in the same direction - channelizing traffic in exit only applications - urban turn restrictions - indicating changes of alignment in the roadway - delineating edge of pavement drop off where space limitations do not allow the use of larger systems.
- Shall be made of a material that can be struck without causing vehicle damage.
- Day and low speed roadways (40 MPH or less). Requirements: 18" minimum height with atleast (1) one 3" retro-reflective stripe.
- Night and high speed roadways (45 MPH or higher) Requirements: 28" minimum height with (2) two retro-reflective stripes that are between 2" - 3" wide.
- Channelizer Stripes shall begin 2" from the top and have 2" - 6" between stripes
Marker Tube Diameter shall be a minimum of 2" with 2" - 3" outside diameters being the most common.
- Tubular Markers shall have permanently affixed bases or have weighted portable bases.
Lane separators shall be crashworthy.
- In TTC work zones, Tubular Markers should only be used where space restrictions do not allow more visible devices.
Helpful Hint:
- White Reflective Sheeting separates same direction traffic flow or supplements right edge white lines.
- Yellow Reflective Sheeting separates opposite direction traffic flow or supplements left edge yellow lines.
