Stimsonite Model 201 Snow Plowable Marker Lens Cradle [50/BOX]
This Casting Sold per Box of 50.
Use the Stimsonite Model 201 Snow Plowable Marker Lens Cradle [50/BOX] for 1-Way or 2-Way reflection.
- PRODUCT ID: RPMM201
- Size: 5" long x 3" wide x .70" high
- Installed Height: approx. .12" above road surface
- Material: polycarbonate
plastic
- Weight: approx. 2.12 lbs per lens cradle
- Compatibility: For use with a replaceable Snow Plowable Marker which can be inserted to reflect light from 1-Way or 2-Way directions. Snow Plowable Markers SOLD SEPARATELY.
- Installation Note: Surface of the cradle shall be free of scale, dirt, rust, oil, grease or any other contaminant which may reduce its bond to the installation adhesive.
- Installation Adhesive: Purchase adhesive options, such as 2-Part Epoxy or Liquid Nails LN-602, separately.
- LENS CRADLE ADVANTAGES:
- Lightweight casting is an alternative to iron castings.
- Polycarbonate casting is a rust-free surface which allows for easy installation of replaceable reflectors.
- Dual tab design places the casting at the optimal depth to prevent snowplow strikes.
- Tandem reflectors increase total reflective area and feature excellent wet-night reflectivity.
- A tandem application of two markers is less expensive than a single iron casting application.
- Shallow grooves have less initial clean-out than typical sun marker recessed applications.
- Shallow groove depth is less jarring for drivers.
- Raised pavement markers have been proven to
improve lane delineation and increase preview time by
up to four seconds. Raised pavement markers are the
best wet weather lane delineator and have been
shown to decrease crash rates on highways with RPM
center lines by approximately 0.5 crashes per million
vehicle-miles.
