Barricade Boards
Use these orange and white Barricade Boards to help block off certain areas and roads.
-
PRODUCT ID: RSPB3Z(XXX)S(R)M(S/D)(L/R)OW6
-
Barricade Length (XXX): (048) 48" (4 ft) | (072) 72" (6 ft) | (096) 96" (8 ft) | (120) 120" (10 ft) | (144) 144" (12 ft)
-
Reflective Sheeting (R): (H) High Intensity Prismatic | (D) Diamond Grade
-
Sides (S/D): (S) Single Sided | (D) Double Sided
-
Stripe Direction (L/R): (L) Left | (R) Right or omit if (D) Double Sided which is Left on Side 1 and Right on Side 2
-
Stripe Colors: (OW) Orange/White
-
Barricade Dimensions: 1" thick x 8" wide by length of choice above.
-
Use road block barricade boards with multiple barricade leg options, sold separately.
-
Call customer service at 1-800-367-1492 to order other stripe colors and configurations.
A barricade is a portable or fixed device having from one to three rails with appropriate marking and is used to control road users by closing, restricting, or delineating all or a portion of the right-of-way. Refer to the MUTCD for more information.
-
Type 1 Barricades may be used on conventional roads or urban streets.
-
Type 2 Barricades should be used on freeways and expressways or other high-speed roadways.
-
Type 3 Barricades should be used to close or partially close a road.
-
Red/White Stripes: When barricades are used to warn road users of the end of a roadway, the stripes shall be red and white.
-
Sign Placement: Signs mounted on barricades and barricade/sign combinations shall be crashworthy.
The MUTCD (Manual for Traffic Control Devices) specifies sizes and color combos for Barricade Boards and Vertical Panels. Refer to the MUTCD for more information.
-
4" Stripes: boards/panels that are 8-12" x 24" and smaller shall have 4" Stripes
-
6" Stripes: boards/panels that are 8-12" x 36" and larger shall have 6" Stripes
-
Red/White Stripes: STOP or Prohibition (Permanent)
-
Orange/White Stripes: indicate Temporary Traffic Control
-
NOTE: Barricade sheeting can NOT be rotated for use as both "left" and "right". There is a common misconception that "ALL" striped goods can be used for both "right" and "left" options by simply rotating them 180 degrees. Shown Below: Rotate the "right" object marker -or- barricade board and it remains a "right".
