LoPro Airport Barricades
Use the LoPro Airport Barricades near airports.
-
PRODUCT ID: RSPBE1PLPA096(X)
-
Reflective Sheeting (X): (H) High Intensity Pristmatic | (D) Diamond Grade | (N) No Sheeting
-
Reflective Sheeting Stripe Colors: Orange/White
-
Color: Orange (other colors available with minimum purchase quantity)
-
Material: High Density Polyethylene
-
Weight: 25 lbs. empty
-
Fill with up to 220lbs (26 gallons) of water - two fill holes and one drain hole.
-
Size: 8' long x 10" high
-
A Low-profile, interlocking barricade system.
-
Durable construction
-
7 degree angled sidewall facilitates visibility - accepts 72"L x 6"H continuous reflective sheeting.
- Connectors are molded into the LoPro Airport barricade, no pins to lose - allows interconnected units to pivot in multiple orientations between 90 and 180 degrees.
-
Accepts two styles of warning lights; screw on airport lights and standard barricade bolt-on lights.
-
(2) two flag mounts.
-
Lights and Flags, Sold Separately.
-
Forklift access, recessed areas at bottom of barricade.
-
Stackable for transportation and storage - multiple stacking lugs keep units in place while stacked.
-
FAA Advisory Circular No. 150/5370-2F compliant.
-
Compatibility: For use to close taxiways, runways, and delineate construction areas at airports.
-
Call customer service at 1-800-367-1492 for additional options or assistance with ordering.
A barricade is a portable or fixed device having from one to three rails with appropriate marking and is used to control road users by closing, restricting, or delineating all or a portion of the right-of-way. Refer to the MUTCD for more information.
-
Type 1 Barricades may be used on conventional roads or urban streets.
-
Type 2 Barricades should be used on freeways and expressways or other high-speed roadways.
-
Type 3 Barricades should be used to close or partially close a road.
-
Red/White Stripes: When barricades are used to warn road users of the end of a roadway, the stripes shall be red and white.
-
Sign Placement: Signs mounted on barricades and barricade/sign combinations shall be crashworthy.
The MUTCD (Manual for Traffic Control Devices) specifies sizes and color combos for Barricade Boards and Vertical Panels. Refer to the MUTCD for more information.
-
4" Stripes: boards/panels that are 8-12" x 24" and smaller shall have 4" Stripes
-
6" Stripes: boards/panels that are 8-12" x 36" and larger shall have 6" Stripes
-
Red/White Stripes: STOP or Prohibition (Permanent)
-
Orange/White Stripes: indicate Temporary Traffic Control
-
NOTE: Barricade sheeting can NOT be rotated for use as both "left" and "right". There is a common misconception that "ALL" striped goods can be used for both "right" and "left" options by simply rotating them 180 degrees. Shown Below: Rotate the "right" object marker -or- barricade board and it remains a "right".
