#4 Wing Bracket
Use the #4 Wing Bracket with street name signs.
-
PRODUCT ID: RPBCT4
-
For Blade Type: Flat or Extruded Blades
-
Size of this Aluminum Sign Wing Bracket: 4.5" x 2.5"
-
Material: Aluminum
-
Color/Finish: Silver
-
Hardware: Bracket includes hardware to attach sign to bracket; hardware to mount bracket to surface is not included.
-
Compatibility: The #4 Wing Bracket is designed for wall or post mount of up to .125 gauge flat or extruded signs with 3/4" strapping or bolts, lag screws, or spikes in 2 - .4375 diameter holes. No bolt-through application.
-
Installation Notes: Brackets must be installed with appropriate hand tools. Brackets should be hand tightened to 3 Foot Pounds of Torque. This is sufficient for the set screw to bite into the aluminum sign and prevent it from coming out of the bracket. Over-tightening causes the bracket to flare and ultimately break as well as embed itself into the aluminum sign. Power tools such as drills and impacts should NOT be used. Power tools cause over tightening, which in turn, causes bracket failure. Returns or exchanges are not available if power tools have been used.
