Bell Wing Bracket
Use the Bell Wing Bracket with street name signs.
-
PRODUCT ID: RPBCTBW(XX)
-
For Sign Type: Ideal for single -or- double faced parking signs, bus stop signs, point of purchase advertising, and other commercial signs.
-
Size (XX): (12) 12" | (18) 18" | (24) 24"
-
12" Bell Bracket requires a single strap. 18" and 24" bell brackets require 2 straps per bracket.
-
Hardware: Sign attaches with 5/16" bolts. Hardware Sold Separately.
-
Material: Aluminum
-
Color/Finish: Silver
-
Compatibility: This Bell Bracket is designed for mounting signs to a wall, concrete, wood or any post with 3/4" strapping, bolts or 5/16" lag screws or spikes. Hardware Sold Separately.
-
Installation Notes: Bell Brackets must be installed with appropriate hand tools. Brackets should be hand tightened to 3 Foot Pounds of Torque. This is sufficient for the set screw to bite into the aluminum sign and prevent it from coming out of the bracket. Over-tightening causes the bracket to flare and ultimately break as well as embed itself into the aluminum sign. Power tools such as drills and impacts should NOT be used. Power tools cause over tightening, which in turn, causes bracket failure. Returns or exchanges are not available if power tools have been used.
