Type I and II: Combocade Barricades (Steel Legs & Plastic Boards)
New Plastic Power Boards are 50% stronger than before and eliminate broken boards.
-
PRODUCT ID: RSPB1PMPC(T)WH(R)(TPBP)
-
Barricade Type (T): (1) Type I | (2) Type II
-
Reflective Sheeting (R): (E) Engineer Grade | (H) High Intensity Prismatic | (D) Diamond Grade
-
Type 1 Panel Sizes (TPBP):
(0806) 8" x 24" Reflective Top Panel | 6" x 24" Blank Bottom Panel
(1206) 12" x 24" Reflective Top Panel | 6" x 24" Blank Bottom Panel
-
Type 2 Panel Sizes (TPBP):
(0808) 8" x 24" Reflective Top Panel | 8" x 24" Reflective Bottom Panel
(1208) 12" x 24" Reflective Top Panel | 8" x 24" Reflective Bottom Panel
-
Barricade Reflective Panel Specifications:
Reflective Sides: Outside panels on both sides of barricade as specified by type options selected.
Stripe Colors: Orange/White
Stripe Direction: Side 1 - Right Stripes | Side 2 - Left Stripes
-
Barricade Dimensions: 24.4" W x 42.6"H
-
Ideal for public works projects, Combocades replaceable components save you money!
-
New double wall plastic power boards are extremely durable, 50%stronger.
- Plastic power boards are strong and dense, will not bend, warp, won't crack under weight
of a sandbag, splinter, or peel.
- Plastic power boards have strong, reinforced bolt/rivet holes that are molded in, just punch them out to replace board.
-
14 gauge, galvanized 45" steel legs can be replaced or repaired.
-
MASH Passed/Meets MUTCD Standards.
-
Barricades come fully assembled.
-
Leg hinge hole accepts 1/2" light mounting bolt.
-
Call customer service at 1-800-367-1492 to order stenciling, other stripe colors and configurations and replacement parts.
A barricade is a portable or fixed device having from one to three rails with appropriate marking and is used to control road users by closing, restricting, or delineating all or a portion of the right-of-way. Refer to the MUTCD for more information.
-
Type 1 Barricades may be used on conventional roads or urban streets.
-
Type 2 Barricades should be used on freeways and expressways or other high-speed roadways.
-
Type 3 Barricades should be used to close or partially close a road.
-
Red/White Stripes: When barricades are used to warn road users of the end of a roadway, the stripes shall be red and white.
-
Sign Placement: Signs mounted on barricades and barricade/sign combinations shall be crashworthy. Refer to MUTCD Section 6F.03.10
The MUTCD (Manual for Traffic Control Devices) specifies sizes and color combos for Barricade Boards and Vertical Panels. Refer to the MUTCD for more information.
-
4" Stripes: boards/panels that are 8-12" x 24" and smaller shall have 4" Stripes
-
6" Stripes: boards/panels that are 8-12" x 36" and larger shall have 6" Stripes
-
Red/White Stripes: STOP or Prohibition (Permanent)
-
Orange/White Stripes: indicate Temporary Traffic Control
-
NOTE: Barricade sheeting can NOT be rotated for use as both "left" and "right". There is a common misconception that "ALL" striped goods can be used for both "right" and "left" options by simply rotating them 180 degrees. Shown Below: Rotate the "right" object marker -or- barricade board and it remains a "right".
