Type I and II: I-Beam A-Frame Barricades
The Type I and II: I-Beam A-Frame Barricades are perfect for crowd control.
-
PRODUCT ID: RSPBAPAIK(XXX)(R)D(T)
-
Board Length (XXX): (072) 72" | (096) 96" | (120) 120"
-
Reflective Sheeting (R): (E) Engineer Grade | (H) High Intensity Prismatic | (D) Diamond Grade
-
Type (T): (1) Type I (1 board) | (2) Type II (2 boards)
-
Barricade Board Specifications:
Reflective Sides: Double-Sided
Stripe Colors: Orange/White
Stripe Direction: Side 1 - Right Stripes | Side 2 - Left Stripes
-
Perfect for crowd control and road closures.
-
Rugged, "double-wall" A-Frame plastic barricade.
-
Unique I-Beam board creates a rigid barricade system and protects the sheeting.
-
Easy to set up, transport, and store.
-
Use with one I-Beam Board as a Type I Barricade or two I-Beam Boards as a Type II Barricade.
-
Flashing light mounting receptacle on each leg.
-
Legs can be ballasted with sand.
-
Boards weigh 1 lb. per foot.
-
Call customer service at 1-800-367-1492 to order additional barricade board options or components.
A barricade is a portable or fixed device having from one to three rails with appropriate marking and is used to control road users by closing, restricting, or delineating all or a portion of the right-of-way. Refer to the MUTCD for more information.
-
Type 1 Barricades may be used on conventional roads or urban streets.
-
Type 2 Barricades should be used on freeways and expressways or other high-speed roadways.
-
Type 3 Barricades should be used to close or partially close a road.
-
Red/White Stripes: When barricades are used to warn road users of the end of a roadway, the stripes shall be red and white.
-
Sign Placement: Signs mounted on barricades and barricade/sign combinations shall be crashworthy.
The MUTCD (Manual for Traffic Control Devices) specifies sizes and color combos for Barricade Boards and Vertical Panels. Refer to the MUTCD for more information.
-
4" Stripes: boards/panels that are 8-12" x 24" and smaller shall have 4" Stripes
-
6" Stripes: boards/panels that are 8-12" x 36" and larger shall have 6" Stripes
-
Red/White Stripes: STOP or Prohibition (Permanent)
-
Orange/White Stripes: indicate Temporary Traffic Control
-
NOTE: Barricade sheeting can NOT be rotated for use as both "left" and "right". There is a common misconception that "ALL" striped goods can be used for both "right" and "left" options by simply rotating them 180 degrees. Shown Below: Rotate the "right" object marker -or- barricade board and it remains a "right".
