« Previous Next »

Detour (Word inside Left or Right Arrow) Signs for Temporary Traffic Control (Crashworthy Barricade Signs)

No reviews yet Write a Review
SKU:
S(XXXX)M410(L/R)(X)(S)C
Detour (Word inside Left or Right Arrow) Signs for Temporary Traffic Control (Crashworthy Barricade Signs)
$58.67 - $98.53

Detour (Word inside Left or Right Arrow) Signs (Crashworthy Barricade Signs)

Detour Left or Right Arrow Signs are used as temporary signage in temporary traffic control areas.

  • PRODUCT ID: S(XXXX)M410(L/R)(X)(S)C
  • Size (XXXX):
    (4836)     48" x 36" for Conventional Single/Multi-Lane Roads/Expressway/Freeway
  • Reflective Sheeting (X):
    (D)     VIP Diamond Grade TOP SELLER
    (3) DG3 Diamond Grade Cubed
    (H) High Intensity Prismatic
  • Direction (L/R): (L) Left | (R) Right
  • Sign Substrate (S):
    (A)     .080" Aluminum (with radius corners & holes)
    (M3) 3MM ACM (with radius corners & holes)
    (C04) 4MM Coroplast (with straight corners & no holes)
    (C10) 10MM Coroplast (with straight corners & no holes)
  • Crashworthy Guidance: CPC offers multiple substrate/sheeting combinations to suit your specific project needs. ACM and Coroplast signs and plaques are considered "crashworthy" in most states. Please consult your state�s approved products list to make the most informed decision.
  • MUTCD Sign Designation: M4-10L - Left | M4-10R - Right

About Work Zone Signs

Work Zone signs have orange backgrounds. They communicate road and hazard conditions in temporary areas such as construction and utility work. Refer to the MUTCD for more information.

Replacement Requirements*

Work Zone signs should only be used in “new” or “like new” condition and replaced immediately if missing, damaged or deteriorated. While they are temporary signs, condition is extremely critical because travel through work zones can be hazardous with unexpected or unusual conditions. * Maintenance of signs and sign support: FHWA-SA-09-025

Size Requirements

Work Zone Signs: 36" x 36" for Single/Multi | 48" x 48" for Expressway

NOTE: 30" x 30" WORK ZONE SIGNS are no longer permitted on many roads.

Are Your Signs Bright Enough?

  • All Ground Mounted Warning Signs MUST be Type II Reflective or better.
  • All Roll-Up Signs used at night MUST be retro-reflective.

Ground Mounted Sign Support Requirements

Sign mounting heights from the ground to the bottom of a sign (Above Grade Clearance) and distances from the roadside (Clear Zone) based on speed and road type:

Ground Mounted Sign Supports

Are your sign supports crashworthy?

All Sign supports within temporary traffic control areas must be crashworthy. Choose a NCHRP-350 approved sign stand or breakaway systems for U-Channel Posts, Square Posts, or Round Posts.

Related Products

Product Catalogs and Guides

CPC Signs Traffic Control & Roadway Safety Product Catalog
CPC Signs Traffic Control
& Roadway Safety
Product Catalog
Brite Max Reflectors and Delineators Product Guide
Brite Max Reflectors
and Delineators
Product Guide
Custom Street Name Packages, Systems and Components Product Guide
Custom Street Name
Packages, Systems and
Components Product Guide
Construction Work Zone Product Guide
Construction
Work Zone
Product Guide
Incident Management Signs and Safety Product Guide
Incident Management
Signs and Safety
Product Guide
Pavement Markings Product Guide
Pavement Markings
Product Guide