Federal Standard Street Name Finished Signs | NO Lip | Trim Brackets
Buy your Federal Standard Street Name Finished Signs for use in Trim Brackets today.
- PRODUCT ID: M2AH(X)D(XXXX)(S/T)BM(XX)N
- Overlay Film Color (X): (A) Green on White | (B) Blue on White | (C) Brown on White | (D) Black Letters on White | (E) Black on White
- Sizes (XXXX) | Letter Height (XX) | Corner Radius (S/T):
(0636) 36" x 6" | (42) 4" Primary & 2" Prefix/Suffix | (S) .75" Corner Radius
(0936) 36" x 9" | (63) 6" Primary & 3" Prefix/Suffix | (T) 1.5" Corner Radius
(0942) 42" x 9" | (63) 6" Primary & 3" Prefix/Suffix | (T) 1.5" Corner Radius - Material: .080" Aluminum
- Bracket Lip: No Lip
- Compatibility:
- Sheeting: White High Intensity Prismatic
- Reflective Sides: Doubled-Sided (All reflective custom street name sign blanks are double sided. Single sided available upon request)
- Standard Letter Font: Standard B Series or largest Highway Gothic Font Series that space will allow based on the number of letters.
- Compatibility: for use inside Trim Brackets or use Standard, Jumbo and Wing Sign Brackets. (Brackets Sold Separately)
- Installation Notes: Signs must be installed with appropriate hand tools. Power tools such as drills and impacts should NOT be used. Power tools cause over tightening, which in turn, causes bracket failure. Returns or exchanges are not available if power tools have been used for installation.
- NOTE: Signs are sold separately from brackets, posts and hardware.
