Name: Silver 1.75" Square Punched Steel Posts
SKU: RSPB3ZBUZTU60
Price: 28.66 USD
Availability: InStock

Silver 1.75" Square Punched Steel Posts

No reviews yet Write a Review

SKU:

RSPB3ZBUZTU60

Silver 1.75" Square Punched Steel Telespar Posts

Ideal for parking lots.

PRODUCT ID: RSPB3ZBUZTU60
Post Length: 5' (60")
Compatibility: For use as a Sign Post or as an Upright, a Type 3 Barricade Component.
PRODUCT ID: RSPB3ZBUZTC70
Post Length: 5.8' (70")
Compatibility: For use as a Sign Post or as a Crossmember, a Type 3 Barricade Component.

PRODUCT ID: RPOSG(XX)14175
Post Length: (08) 8' (96") | (10) 10' (120") | (12) 12' (144")
Compatibility: For use as a Sign Post.

Material: Punched Galvanized Steel
Color/Finish: Silver
Outside Size: 1.75"
Post Wall: 14 gauge
Posts are punched full length with 7/16" holes on 1" centers.
Use Base Posts and Corner Bolt for breakaway installation.
Superior torsional strength with easy, safe installation by hand or with power equipment.
Convenient sign mounting before installation.
Versatile, 4-sided sign mounting, at any height.
Fast and economical replacement of damaged posts.
Re-usable materials.
FHWA-approved yielding capability.
Optional black powder coat is available for posts and hardware.
Use brackets shown in the square post category for mounting sign to square post.
NOTE: Posts taller than 8ft must ship truck line. BEST PRACTICE: Avoid costly LTL truck line charges on small orders by ordering an 8ft post plus the corresponding breakaway system to save money and meet your desired sign mounting height.

Videos

About Barricades

A barricade is a portable or fixed device having from one to three rails with appropriate marking and is used to control road users by closing, restricting, or delineating all or a portion of the right-of-way. Refer to the MUTCD for more information.

Type 1 Barricades may be used on conventional roads or urban streets.
Type 2 Barricades should be used on freeways and expressways or other high-speed roadways.
Type 3 Barricades should be used to close or partially close a road.
Red/White Stripes: When barricades are used to warn road users of the end of a roadway, the stripes shall be red and white.
Sign Placement: Signs mounted on barricades and barricade/sign combinations shall be crashworthy.

About Barricade Stripes

The MUTCD (Manual for Traffic Control Devices) specifies sizes and color combos for Barricade Boards and Vertical Panels. Refer to the MUTCD for more information.

4" Stripes: boards/panels that are 8-12" x 24" and smaller shall have 4" Stripes
6" Stripes: boards/panels that are 8-12" x 36" and larger shall have 6" Stripes
Red/White Stripes: STOP or Prohibition (Permanent)
Orange/White Stripes: indicate Temporary Traffic Control
NOTE: Barricade sheeting can NOT be rotated for use as both "left" and "right". There is a common misconception that "ALL" striped goods can be used for both "right" and "left" options by simply rotating them 180 degrees. Shown Below: Rotate the "right" object marker -or- barricade board and it remains a "right".