Name: Type III: Volcano Base & Telespar Breakaway System Kit #3
SKU: GROUPRSPB3ZBUS2S
Price: 287.09 USD
Availability: InStock

Type III: Volcano Base & Telespar Breakaway System Kit #3

No reviews yet Write a Review

SKU:

GROUPRSPB3ZBUS2S

Type III: Volcano Base & Telespar Breakaway System Kit #3

The Type III: Volcano Base & Telespar Breakaway System Kit #3 has everything you need for a Type III barricade except for the barricade boards.

PRODUCT ID: RSPB3ZBUS2S
Kit #3 features Volcano Bases with Telespar Posts
Material: 14 gauge galvanized steel square post breakaway system
Post Size: 1.75" Uprights
Kit #3 Includes:
(2) Two - Volcano Bases
(2) Two - 5ft long Telespar® Uprights
(1) One - Hardware Kit - Board to Square Post Upright (2) Two - Quick Release Lock Pins
Choose Barricade Boards (Sold Separately from Breakaway Kit)
Telespar Breakaway Kit #3 allows quick removal of uprights from volcano bases for short term or permanent placement.
Easy to assemble and replace parts, if necessary.
The Telespar® Square Posts shape provides superior wind load capabilities and inhibits warping. Galvanized, hot rolled high carbon steel. Pre-punched mounting 7/16' holes. Upright accepts a flashing barricade light.
Meets MUTCD Standards.
NOTE: Barricade Boards, Sold Separately.

Videos

About Barricades

A barricade is a portable or fixed device having from one to three rails with appropriate marking and is used to control road users by closing, restricting, or delineating all or a portion of the right-of-way. Refer to the MUTCD for more information.

Type 1 Barricades may be used on conventional roads or urban streets.
Type 2 Barricades should be used on freeways and expressways or other high-speed roadways.
Type 3 Barricades should be used to close or partially close a road.
Red/White Stripes: When barricades are used to warn road users of the end of a roadway, the stripes shall be red and white.
Sign Placement: Signs mounted on barricades and barricade/sign combinations shall be crashworthy.

About Barricade Stripes

The MUTCD (Manual for Traffic Control Devices) specifies sizes and color combos for Barricade Boards and Vertical Panels. Refer to the MUTCD for more information.

4" Stripes: boards/panels that are 8-12" x 24" and smaller shall have 4" Stripes
6" Stripes: boards/panels that are 8-12" x 36" and larger shall have 6" Stripes
Red/White Stripes: STOP or Prohibition (Permanent)
Orange/White Stripes: indicate Temporary Traffic Control
NOTE: Barricade sheeting can NOT be rotated for use as both "left" and "right". There is a common misconception that "ALL" striped goods can be used for both "right" and "left" options by simply rotating them 180 degrees. Shown Below: Rotate the "right" object marker -or- barricade board and it remains a "right".