Sign Sleeves for Plasticade Type I and II Folding Barricades
Add a sign to your Plasticade Type I and II barricades with the Sign Sleeves for Plasticade Type I and II Folding Barricades.
- PRODUCT ID: RSPB1PPPLZSIGNSL(XX)(X)
- Color (XX): (WH) White | (OR) Orange
- Installation (X): (I) Pre-Installed on Plasticade Type 1 or 2 Barricade at time of order. | (U) Un-installed to add to existing Plasticade Type I or II Barricades.
- Plasticade Type I and II Folding Barricades are NCHRP-350 Accepted for use as a sign stand with this sign sleeve.
- Compatibility: For use with Plasticade Type I or II Folding Barricade only, with signs up to 48" x 48" made of lightweight aluminum composite material.
- Hardware: Included to mount 1 sign sleeve to plasticade barricade.
About Barricades
A barricade is a portable or fixed device having from one to three rails with appropriate marking and is used to control road users by closing, restricting, or delineating all or a portion of the right-of-way. Refer to the MUTCD for more information.
- Type 1 Barricades may be used on conventional roads or urban streets.
- Type 2 Barricades should be used on freeways and expressways or other high-speed roadways.
- Type 3 Barricades should be used to close or partially close a road.
- Red/White Stripes: When barricades are used to warn road users of the end of a roadway, the stripes shall be red and white.
- Sign Placement: Signs mounted on barricades and barricade/sign combinations shall be crashworthy.
About Barricade Stripes
The MUTCD (Manual for Traffic Control Devices) specifies sizes and color combos for Barricade Boards and Vertical Panels. Refer to the MUTCD for more information.
- 4" Stripes: boards/panels that are 8-12" x 24" and smaller shall have 4" Stripes
- 6" Stripes: boards/panels that are 8-12" x 36" and larger shall have 6" Stripes
- Red/White Stripes: STOP or Prohibition (Permanent)
- Orange/White Stripes: indicate Temporary Traffic Control
- NOTE: Barricade sheeting can NOT be rotated for use as both "left" and "right". There is a common misconception that "ALL" striped goods can be used for both "right" and "left" options by simply rotating them 180 degrees. Shown Below: Rotate the "right" object marker -or- barricade board and it remains a "right".
