Type I and II: I-Beam A-Frame Barricades
The Type I and II: Rigid I-Beam A-Frame Barricades are perfect for crowd control.
- PRODUCT ID: RSPBAPAIK(XXX)(R)D(T)
- Board Length (XXX): (072) 72" | (096) 96" | (120) 120"
- Reflective Sheeting (R): (E) Engineer Grade | (H) High Intensity Prismatic | (D) Diamond Grade
- Type (T): (1) Type I (1 board) | (2) Type II (2 boards)
- Barricade Board Specifications:
Reflective Sides: Double-Sided
Stripe Colors: Orange/White
Stripe Direction: Side 1 - Right Stripes | Side 2 - Left Stripes - Perfect for crowd control and road closures.
- Rugged, "double-wall" A-Frame plastic barricade.
- Unique I-Beam board creates a rigid barricade system and protects the sheeting.
- This plastic A-frame barricade is easy to set up, transport, and store.
- Use with one I-Beam Board as a Type I Barricade or two I-Beam Boards as a Type II Barricade.
- Flashing light mounting receptacle on each leg.
- Legs can be ballasted with sand.
- Boards weigh 1 lb. per foot.
- Call customer service at 1-800-367-1492 to order additional barricade board options or components.
About Barricades
A barricade is a portable or fixed device having from one to three rails with appropriate marking and is used to control road users by closing, restricting, or delineating all or a portion of the right-of-way. Refer to the MUTCD for more information.
- Type 1 Barricades may be used on conventional roads or urban streets.
- Type 2 Barricades should be used on freeways and expressways or other high-speed roadways.
- Type 3 Barricades should be used to close or partially close a road.
- Red/White Stripes: When barricades are used to warn road users of the end of a roadway, the stripes shall be red and white.
- Sign Placement: Signs mounted on barricades and barricade/sign combinations shall be crashworthy.
About Barricade Stripes
The MUTCD (Manual for Traffic Control Devices) specifies sizes and color combos for Barricade Boards and Vertical Panels. Refer to the MUTCD for more information.
- 4" Stripes: boards/panels that are 8-12" x 24" and smaller shall have 4" Stripes
- 6" Stripes: boards/panels that are 8-12" x 36" and larger shall have 6" Stripes
- Red/White Stripes: STOP or Prohibition (Permanent)
- Orange/White Stripes: indicate Temporary Traffic Control
- NOTE: Barricade sheeting can NOT be rotated for use as both "left" and "right". There is a common misconception that "ALL" striped goods can be used for both "right" and "left" options by simply rotating them 180 degrees. Shown Below: Rotate the "right" object marker -or- barricade board and it remains a "right".
