Sign Trim Brackets
Use the Sign Trim Brackets to mount signs to posts.
-
PRODUCT ID: OSIZ3UNJTRIMLOGOBK for 6" x 6" Logo Sign
-
PRODUCT ID: OSIZ3UNCTRIMLOGOBK for 9" x 9" Logo Sign
-
PRODUCT ID: OSIZ3UNJTRIM36BK for 6" x 36" Street Name Sign with .75" corner radius
-
PRODUCT ID: OSIZ3UNCTRIM36BK for 9" x 36" Street Name Sign with 1.5" corner radius
-
PRODUCT ID: OSIZ3UNCTRIM42BK for 9" x 42" Street Name Sign with 1.5" corner radius
-
Color/Finish: Black Semi-Gloss Powder Paint
- More Powder Paint Colors Available by Custom Order. Call 1-800-367-1492 for a quote on Custom Orders. Choose custom order colors from the CPC Standard Powder Paint Color Chart.
download pdf | view digital edition
-
Sign to Bracket Hardware: Black 1/4" x 1" Torx Head Screws to attach the sign to bracket are included. The Torx Head Screw is a self tapping screw which inserts through pre-drilled holes in the sign and sign arm. The self tapping action forms a tight bond between sign and sign arm and the design helps prevent rust by not piercing the bottom side of the sign arm.
- Post to Bracket Hardware: Hardware packages to mount the bracket to the post are included with the purchase of the "P" hole punch pattern post.
-
Post Hole Punch Patterns Required: Use "P3" for 6" trims and "P" for 9" trims.
-
Compatibility: Sign trim brackets for use with 3" OD and 4" OD round posts as well as 3" and 4" smooth square posts.
-
Installation Notes: Brackets must be installed with appropriate hand tools. Power tools such as drills and impacts should NOT be used. Power tools cause over tightening, which in turn, causes bracket failure. Returns or exchanges are not available if power tools have been used for installation.
-
NOTE: Signs are not included with brackets, sold separately. Available in larger quantities by calling customer service at 1-800-367-1492.
