GPD-45 Multi Pro
If you are looking for the power you need for tough jobs combined with the flexibility of being able to drive almost anything, look no further. The multitude of configurations that Rhino's Chuck-Lok system allows you to quickly change between is incredibly impressive.
- PRODUCT ID: RPEDNGPD45XA
Includes 1", 1-3/4", and 2" Chuck-Lok Adapters - PRODUCT ID: RPEDNGPD45XAU
Includes U-Channel Chuck - This driver is best suited to primarily driving U-Channel.
- The XA model was designed at the request of sign installers, municipalities, and rental houses.
- The XA model is the Multi Pro with the extended anvil and longer Chuck-Lok already installed.
- This makes it truly a 4 bolt change to switch to channel posts, square tubes, and back to rounds.
- The XA weighs in only 7lbs heavier than the standard Multi Pro and is primarily designed for higher productivity and U-channel sign installers.
Chucks, Chuck Adapters and Accessories
How to measure your post: Please note, chuck and chuck adapter sizes shown are actual inside dimensions of the opening. To select the proper adapter, measure the longest outside dimension of the post to be driven to confirm it will fit inside the opening. In the case of square or rectangular posts measure the longest diagonal from corner to corner.
2-1/2" Master Chuck-Lok for use with all GPD -45 Post Driver Models
- PRODUCT ID: RPEDGPDZCH25AMC | 2-1/2" Master Chuck-Lok w/Locking Nut
Post Drive Chuck Adapters for use with the 2-1/2" Master Chuck-Lok
- PRODUCT ID: RPEDZCH25A1 | 1" ID Chuck-Lok Adapter for posts 0" to 7/8" and is best suited for driving electrical ground rod.
- PRODUCT ID : RPEDZCH25A175 | 1-3/4" ID Chuck-Lok Adapter for posts 1-1/8" to 1-5/8"
- PRODUCT ID: RPEDZCH25A2 | 2" ID Chuck-Lok Adapter for posts 1-3/8" to 1-7/8"
- PRODUCT ID: RPEDZCH25ATS | Tent Stake Chuck-Lok Adapter ideally suited for the rigors of tent stake installation.
